IP100H / IP100FS / IP1000C

Out of stock


Full-Duplex Communication That Works Over a Wireless LAN and IP Network


find distributors


Wireless communication system
The IP100H IP communication terminal transmits voice and preprogrammed text messages to the IP1000C controller through the wireless LAN access points installed in the IP network (VPN). The controller redirects traffic to the specified terminals. The IP100FS remote communicator can create a virtual radio and simple dispatch station on a Windows® based PC. The IP100FS can obtain position information (based on using access points) and status information of each terminal.

Calling Features
The IP100H/IP100FS can make Individual calls, Group conference calls, All calls and Area calls. The unique Area call function allows you to call any user who is accessing the specified access point.

Full-duplex Communication
With an optional earphone-microphone (HM-153LS, or HM-166LS) or headset (HS-102 with OPC-2359), the IP100H can talk and receive at the same time. All users in the system can communicate simultaneously.

* For full-duplex operation use either the HM-153LS, HM-166LS, HS-102 with OPC-2359 or the HS-85 with OPC-2144.

IP Phone and Transceiver Interconnection
With a VE-PG4 RoIP gateway, the IP advanced radio system can interconnect with an IP phone, LTE, IDAS™ Conventional, Type-D multi-site trunking and analogue transceivers.
The VE-PG4 has a built-in controller function (equivalent to the IP1000C function), capable of controlling up to 50 IP communication terminals.

IP handhald radio IP100H
• Freeware WLAN transceiver according to IEEE 802.11 (a / b / g / n) (2.4 and 5 GHz *)
• WPA-PSK / WPA2-PSK (TKIP / AES) encryption
• IPX7 waterproof (30 minutes at 1m depth)
• Stable construction according to MIL-STD 810 G
• Compact dimensions of only 58mm × 95mm × 26.4mm and only about 205g light
• Vibrating alert for incoming calls
* Permitted frequency ranges / channels depending on the country of use.

Receive text messages and send pre-programmed messages | Status messages | Emergency call function | Dot matrix display

• IEEE 802.11 a / b / g / n / ac compliant (2.4 GHz and 5 GHz *)
• PoE (Power over Ethernet) possible
• Optional access point management software RS-AP3
* Permitted frequency ranges / channels depending on the country of use.

• The software can communicate with IP handhelds from the PC
• The IP100FS can use the access points to determine the locations of each IP100H when using an AP-90M
• Software can be installed on Windows® tablets or laptops
• USB storage device comes as a USB hardware key

• The IP1000C controls all terminal configurations and all voice traffic
• Possibility to control up to 100 devices (including IP100FS)

Further information can be found in the download area

Download area


Go to Top